The EX12 further builds on the success of the EX6 and EX10 by implementing the revolutionary 3" NVPD large  format compression driver found in our flagship VHD range of products. This makes for one of the most perfectly  balanced and accurate, compact, 2-way active boxes available on the market today. Complete onboard control  courtesy of electronic crossovers, phase alignment, equalization and speaker protection are all integrated into the  EX12’s amplifier module.
 
Features
Professional, Baltic birch construction with wear resistant polymer coating
127dB sustained output, 130dB peak with very high dynamic range and low noise floor
500W of total power with complete on-board speaker management system
450W high efficiency, current enhancing, switching low frequency amplifier
Very high quality 50W, low IM distortion, Class AB, high frequency amplifier with transformer balanced output
Compact asymmetrical trapezoidal design allows for use in stage monitor or under balcony applications with high pass filter to adjust equalisation and phase response
Wide dispersion 80° H x 40° V horn
New state of the art 3" (76 mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response
12" woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion and provides increased frequency response linearity
Proprietary top and side handle designs for simplified handling and carrying, integrates one M10 hang point, OmniMountTM bracket point and four M6 bracket points
Ten additional M10 suspension points for flexible rigging and installation options
Top hat for pole mounting applications
LED indicators for signal present, limiter, thermal condition and power ON status
 
System Acoustic Performance
Max SPL Long-term
127dB
Max SPL Peak
130dB
-3dB Response
55Hz to 22kHz
-10dB Response
45Hz to 30kHz
Crossover Point
1.1kHz
High Frequency Section
Acoustic Design
Horn Loaded
High Horn Coverage Horizontal / Vertical
80° x 40°
Rotatable Horn
NO
Throat Exit Diameter / Diaphragm Size
1.4" / 3"
Diaphragm Material
Nitride Titanium
Magnet Type
Neodymium
High Frequency Amplifier Specification
Type
Class AB Push-Pull
Rated Continuous Power
50W
Distortion
<0.05%
Operating Bandwidth
1.1kHz to 30kHz
Low Frequency Section
Acoustic Design
Front Loaded, Bass Reflex
Woofer Size / Voice Coil Diameter / Design
12" / 3.0" / Trans Coil
Magnet Type
Neodymium
Diaphragm Material
Epoxy Reinforced Cellulose
Low Frequency Amplifier Specification
Type
High efficiency, Current-enhancing switch mode
Rated Continuous Power
450W
Distortion
<0.05%
Operating Bandwidth
45Hz to 1.1kHz
Signal Input
Input Sensitivity
1.0V RMS
Input Impedance
20 kΩ
Power Requirements
Power Connector
Neutrik PowerCon®
Operating Voltage Range
100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage
6A 115V | 3A 230V | 3A 250V
Cabinet
Cabinet Material
Baltic birch
Handles
2
Pole Mount
35 mm
Color
"Orange peeled" Matt Black or any RAL
Physical Dimensions
Height
596 mm (23.46")
Width
368 mm (14.49")
Depth
368 mm (14.49")
Weight
29 kg (63.8lbs)