The EX2.5MkII is a double 15" subwoofer and the ‘active’ brother of the ES2.6 passive bass module. It provides real depth and power where high bass output is required. The product uses the same low frequency amplifier found inside the EPAK2500/2500R and features in-built stereo crossovers, high pass outputs, and full overdrive protection. It also features a new speaker level output on an AP4 connector to drive one additional passive ES2.6 subwoofer from its own internal amplifier. (Not to be used with a passive ES2.5)
 
 
Features
Professional, Baltic birch construction with wear resistant polymer coating
137dB sustained output 140dB peak (when used with an ES2.6)
1600W high efficiency, current enhancing, switching low frequency amplifier
Speaker level AP4 output to drive one additional passive ES2.6 subwoofer
Complete on board subwoofer management including equalization, crossover, filters, amplifier overdrive protection, output level and phase controls
Excellent reproduction of sub bass frequencies with high transient content at high output levels
Stereo or Mono inputs with through signal outputs and 125Hz High Pass outputs
Two 15" high output, low frequency drivers with 4" (100 mm) inside/outside, epoxy baked, high temperature, voice coil assembly and ferrite magnetic structures
Four propietry side handles for simplified handling and carrying
Heavy duty front grille to work with the innovative new EX2.5 magnetic cart
Acetyl copolymer high impact, low friction feet are located on two sides allowing vertical or horizontal set up and easy cabinet movement Feet lock in to the new ES subwoofers
Six internal corner braces with twelve M10 suspension points M20 top hat for pole mounting applications
LED indicators for signal present, limiter, thermal condition and power ON status
 
System Acoustic Performance
Max SPL Long-term
132dB (137dB - with Slave ES2.6)
Max SPL Peak
135dB (140dB - with Slave ES2.6)
-3dB Response
38Hz to 125Hz
-10dB Response
34Hz to 125Hz
Impedance
8Ω
Crossover Point
125Hz
Output Channels
Number of Channels
1
Minimum load impedance per channel
4Ω
Low Frequency Section
Acoustic Design
Twin Asymmetrical loading
Woofer Size / Voice Coil Diameter / Design
2x 15" / 4" / Inside Outside
Diaphragm Material
Epoxy Reinforced Cellulose
Magnet Type
Ferrite
Low Frequency Amplifier Specification
Type
High efficiency, Low frequency, Current-enhancing switch mode
Rated Continuous Power
1600W
Distortion
<0.05%
Operating Bandwidth
34Hz to 125Hz
Signal Input
Input Channels
2
Input Sensitivity
1.0V RMS
Input Impedance
20kΩ (balanced)
Signal Output
Signal Output Channels
Mid/High, Through
Slave Speaker Output
AP4
Features
Input Level Control
-6 to +6dB
Phase
0° / 180°
RMS Limiter
YES
Indicators
Power ON/Thermal, Limiter
Power Requirements
Power Connector
Neutrik PowerCon®
Output Power Connector
Neutrik PowerCon®
Operating Voltage
115V / 230V / 250V
Operating Voltage Range
100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage
16A 115V | 8A 230V | 8A 250V
Cabinet
Cabinet Material
Baltic birch
Handles
4
Pole Mount
M20
Color
"Orange peeled" Matt Black or any RAL
Physical Dimensions
Height
711.5 mm (28.0")
Width
602.6 mm (23.72")
Depth
750 mm (29.52")
Weight
97 kg (214lbs)